Processing method

Tep technology is very easy to process. All cutting, milling, grooving, folding and bending can be easily accomplished with simple tools of wood and metal. According to the requirements of architectural design, it can be processed into various shapes, such as cutting, bending and grooving. With other decorative materials can not note the convenient processing performance.

Nail up

A simple connection can be made from one direction to the countersunk rivet.

Bending

When using the bending machine to process the trapboard, the appropriate plate tooth should be placed, and the required radius is as follows:

welding

Sample conditions of gas shielded welding welding temperature: 230-240 ℃
Pressure of air compressor :0.3-0.4kg/cm squared pressure: 1.0-1.5kg.
Welding speed: 1000m/min.

shear

It is most effective to use the gantry shearing machine to produce a large number of trapboards, which may appear burrs.
Appropriate clearance and inclination are as follows:

cutting

It is easy to process wood saw and board saw.
Recommended hard alloy blade.

Bolt connection

In terms of the deformation limit, e is greater than 2D, which is the best way to calculate the distance between the aperture D and the hole center.

glue

When using a special binder or a component of the elastomer polymer can achieve a very good bonding effect.

The following is the processing machine that we recommend the most suitable for the processing of tepp aluminum plastic sheet:

cutting

bending

grooving